Bluonics Sediment Replacement Water Filters 4.5" x 10" (5 Micron) 20 Cartridges

Description

Pure Water Clean Air in Every House
Give us a call
Send us a message
Our Store
Seller Profile
Feedback
Save this seller
Contact
Bluonics Sediment Replacement Water Filters 4.5" x 10" (5 Micron) 20 Cartridges
Description
Standard Size 4.5”x 10” (5 Micron) Sediment Filter. Filters sediment particles such as silt, sand, rust, dirt, and other undissolved particles.
Melt-blown Polypropylene Sediment Filters. The main function of a sediment filter is to remove large and fine particles from our drinking water, such as sand, dirt, silt, and rust particles.
Our Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form.  These filters have a lower density at the surface of the filter with progressively higher density toward the center which enables to capture of particles throughout the entire filter depth.
This translates to a longer life, and allows better performance of all the following filters, such as Carbon Block or GAC filters.
Full Case of 20 (5 Micron) Standard size filters 4.5”x 10” Sediment Filters for a Standard Size Housings.
HIGH EFFICIENCY: With great dirt holding capacity because of the graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron catching smaller particles.
HIGH QUALITY FILTRATION: For sediment particles such as silt, sand, rust, dirt, and other undissolved particles. To remove these particles it also allows a better performance if you have a following Carbon Block or GAC Carbon filter.
Payment
Shipping
Give us a call
Send us a message